Hrm. Can't get cruise to activate. (resolved: mis-wired)

[grzzlycanuck]

Feel free to move this to a support forum, my "customer" status has not yet been applied.

I installed the CC today, and seem to have run into a bit of a snag.

For whatever reason, I can't seem to get the cruise to engage. 

I've thrice checked the wiring, and am confident that the correct wires are in the right place in the ECU as well as in the provided red terminator. The wiring from the stalk to the A451 unit appears to be fine, as I was receiving a stuck button rapid flash until I backed the replacement cylinder off a bit.

Essentially, when I press the button to engage the cruise, the LED does not light, and the car does not maintain speed. 

Any pointers would be appreciated.

Thanks.

[grzzlycanuck]

Nevermind. My eye were failing me, had a mixup with green and green/white. All good after straightening that out.

[admin]

There has been some issues with the site over the weekend.  Sorry your admission to the "Customers" group wasn't acted upon right away.

Glad you figured it out.  It is very important that the wires are correct and perhaps we should stress that more in the instructions.

(ps. moved this to appropriate forum)